中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 19216.3-2021 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure |
|||
GB/T 19216.2-2021 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not |
|||
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
|||
GB/T 41170.2-2021 造口辅助器具的皮肤保护用品 试验方法 第2部分:耐湿完整性和黏合强度(中英文版) Skin barrier for ostomy aids -- Test methods -- Part 2: Wet integrity and adhesive strength |
|||
GB/T 5095.2509-2020 电子设备用机电元件 基本试验规程及测量方法 第25-9部分:信号完整性试验 试验25i:外来串扰(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk |
|||
GB/T 38252-2019 建筑门窗耐火完整性试验方法(中英文版) Test method of fire-resistant integrity for building windows and doors |
|||
GB/T 38252-2019 建筑门窗耐火完整性试验方法(中英文版) Test method of fire-resistant integrity for building windows and doors |
|||
GB/T 36137-2018 中空纤维超滤膜和微滤膜组件完整性检验方法(中英文版) Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module |
|||
GB/T 4937.14-2018 半导体器件 机械和气候试验方法 第14部分:引出端强度(引线牢固性)(中英文版) Semiconductor devices—Mechanical and climatic test methods—Part 14: Robustness of terminations(lead integrity) |
|||
YY/T 0681.11-2014 无菌医疗器械包装试验方法 第11部分:目力检测医用包装密封完整性(中英文版) Test methods for sterile medical device package. Part 11: Determining integrity of seals for medical packaging by visual inspection |
|||
YY/T 0681.11-2014 无菌医疗器械包装试验方法 第11部分:目力检测医用包装密封完整性(中英文版) Sterile medical device packaging test methods - Part 11: Visual inspection of medical packaging seal integrity{译} |
|||
GB/T 27903-2011 电梯层门耐火试验 完整性、隔热性和热通量测定法(中英文版) Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux |
|||
TB/T 2871-1998 内燃机车滤芯结构完整性检验方法(中英文版) (Diesel filter structural integrity test methods) |
找到:13條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |